Category: Equipment > Leg Equipment

Email A Friend      Print This Page

Click to enlarge

6000-AI Unilateral Leg Press

Nebula Fitness Equipment

Frame construction is out of 7 gage 4x2 main frame rails. Lower frame is built out of 3x2 11-gage tubing. Seat frame and sled built of 2x2 11 gage all mig welded with open tubes steel cap welded and ground smooth.

Seat is built with lower lumbar back support and adjustable seat angle. Adjustment tube uses a safety lock devise and is activated via ½” pop pin. Rear frame has a dual weight horn mounted, one each side for plate storage.

1 ¼” Class-L shafting is mounted under the 4x2 main rail to track (4) 660 lb. linear bearings mounted in a 2.25” DOM bearing tube. Bearings held in by snap rings for easy maintenance. Bearing carriage is a heavy solid welded frame to eliminate flex of the weight sled.

The sled is a built of 2x2 & 4x2 11gage-tube frame. The footplate is (2) 20”x 22”, (2) angle footplates covered with 3/16” alum tread plate. Sled is connected by a heavy slid pin mounted in the rear weight tube.

Six 4” 1000 lb. rated urethane K wheels with heavy timpkin needle bearings spanners are mounted under the sled that ride frame.

Two 3x2 guide rails hold the (2) sled halves in place and track on the K-wheels.

Stop handles are mounted in a solid steel frame to allow the sled halves to alien easily.

Sled has (2) weight tubes, a short upper tube welded up behind foot deck, and a bolt on lower tube giving a plate load of 40- 45lb plates on the sled.

Quick adjust safety stops that are spring loaded and non-removable.

Frame splits at seat junction for shipping and easier movement. Bolt plates have 1” bent handles welded to them and covered with a foam grip for user support. Dimensions are W64" x L98" x H48” Weight 650 lb.

Average Rating: Rate it:  Poor Excellent Add to Favorites

For more information on this product, visit Nebula Fitness Equipment's website.